Rockford Fosgate M5-800X4

Rockford Fosgate M5-800X4 - 800 Watt 4-Channel IPX6 Element Ready™ Amplifier

The M5-800X4 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.

FEATURES AT A GLANCE

• Element Ready™ design with integrated harness & panel seals
• PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
• Constant Power provides instantaneous delivery of output over varying impedance loads
• Play all day, easy to integrate, and keep music playing for extended lengths of time
• C.L.E.A.N. input/output clip detection and indicator LEDs
• Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
• OEM and aftermarket radio integration inputs
• Top mounted control panel with Element Ready™ smoked lens cover
• Proprietary testing using RATS (Rockford Automated Testing System)
• Low Impedance Stability
• Proprietary Class-AD technology allows amplifier to produce more power with less current draw
• Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
• MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
• Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
• Balanced Differential Inputs eliminates noise picked up by signal cables
• Remote-Out feature when using high level inputs

Specifications

• Number of Channels: 4
• Total Power (Sum of Rated Power): 800 Watts
• Rated Power (RMS Continuous Power)
  • CTA-2006 Guidelines CTA-2006 Continuous Power Rating
  • 100 Watts x 4 @ 4Ω
  • 100 Watts x 4 @ 2Ω
  • 200 Watts x 2 @ 4Ω Bridged/Mono
  • ≤1.0% THD+N
• Dynamic Power (PVC/PowerCube®)
  • CTA-2006 Guidelines CTA-2006 Dynamic Power Rating
  • 125 Watts x 4 @ 4Ω
  • 200 Watts x 4 @ 2Ω
  • 400 Watts x 2 @ 4Ω Bridged/Mono
• Bridgeable: Yes
• Frequency Response: 10 Hz - 50 kHz
• Input Sensitivity: 150mVrms - 12Vrms
• Circuit Topology Class: Class-AD
• Efficiency (average): >75%
• Total Harmonic Distortion (THD+Noise): <0.25% THD+N @ 1 Watt
• Signal Input
  • Low-Level: 4 RCA
  • High-Level: (2) 4-Pin Molex
• Tone Controls
  • Front/Rear: 0-14dB @ 12.5kHz
  • Front/Rear: 0-18dB @ 45Hz
• Crossover Controls
  • High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
  • Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
  • All-Pass: Yes
• Remote Controls: No
• Visual Indicators
  • Power: Blue
  • Protect: Red
  • Input Clip: Red
  • Output Clip: Blue/Red
• Power Wire Gauge: 8 AWG
• Power Input Connector: Compression Terminal Block
• Speaker Wire Gauge: 16 AWG
• Speaker Output Connector: 4-Pin Molex
• Cooling: Convection
• Heatsink: Extruded Aluminum
• Operating Voltage: 9 - 16 VDC
• Max. Current Draw (13.8V Sinewave)
  • 55 A @ 4Ω
  • 85 A @ 2Ω
  • 90 A @ 4Ω Bridged
• Suggested Alternator
• Dimensions (H x W x D): 42.8 mm x 108 mm x 213 mm
• Shipping Weight: 1.9 Kg