Audio Technica AT33EV

Audio Technica AT33EV - Moving Coil Cartridge

The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.

The A33EV is a ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.

Features

• Elliptical stylus chip and durable duralumin tapered pipe cantilever
• 10O mid impedance specifications
• Dramatically increased magnetism with neodymium magnets and PCOCC
• High separation, wide-response dual moving coil
• VC Mold eliminates unnecessary vibrations
• "Hanenite" anti-vibration rubber eliminates unwanted vibrations

Specifications

• Type: Dual Moving Coil
• Mounting: 1/2" Centers
• Frequency Response: 15 - 50,000Hz
• Body Material: Aluminium/Synthetic Resin
• Channel Separation: 30dB (1kHz)
• Output Channel Balance: 0.5dB (1kHz)
• Output Voltage: 0.3mV (1kHz and 3.54cm/sec.)
• Vertical Tracking Angle: 23°
• Vertical Tracking Force Range: 1.8 - 2.2g (2.0g standard)
• Stylus Shape: Elliptical
• Stylus Curvature Radius: 0.3 x 0.7 mil
• Stylus Construction: Nude Square Shank
• Cantilever: Duralumin
• Coil Impedance: 10Ω (1kHz)
• Coil Inductance: 22µH (1kHz)
• DC Resistance: 10Ω
• Static Compliance: 40×10-6cm/dyne
• Dynamic Compliance: 10×10-6cm/dyne (100Hz)
• Terminal Pins: Brass
• Recommended Load Impedance: More than 100Ω (when head amp connected)
• Weight: 6.9g
• Dimensions: H 16 × W 16.6 × D 26.5mm

Replacement Stylus: When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.

Accessories Included: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1

lisätiedot (EN)