Audio Technica AT33Sa

Audio Technica AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

Features

• Advanced tapered boron cantilever and reduced weight
• Neodymium magnet with dramatically enhanced magnetic energy
• PCOCC coil
• High-separation, wide response dual moving coil
• VC mold limits unnecessary vibration
• A tough body designed to be rigid

Specifications

• Type: Dual Moving Coil
• Mounting: 1/2” centers
• Frequency Response: 15 - 50,000Hz
• Body Material: Aluminium/Synthetic Resin
• Channel Separation: 30dB (1kHz)
• Output Channel Balance: 0.5dB (1kHz)
• Output Voltage: 0.4mV (1kHz and 5cm/sec.)
• Vertical Tracking Angle: 23°
• Vertical Tracking Force Range: 1.8 - 2.2g (2.0g standard)
• Stylus Shape: Shibata
• Stylus Curvature Radius: Shibata
• Stylus Construction: Nude square shank
• Cantilever: Nude tapered boron
• Coil Impedance: 10Ω (1kHz)
• Coil Inductance: 22 µm (1kHz)
• DC Resistance: 10Ω
• Static Compliance: 40×10-6cm/dyne
• Dynamic Compliance: 10×10-6cm/dyne (100Hz)
• Recommended Load Impedance: Min 100Ω
• Weight: 6.9g
• Dimensions: H 16 × W 16.6 × D 26.5 mm

    
Accessories Included: 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)

lisätiedot (EN)